Tag: chirp

No comments

Repeaterlist for Oslo area, Norway (repeaterliste Oslo området)

  By

I have made a repeaterlist for the Oslo area in Norway. This list can be saved as CSV from Excel and is then after saving as CSV compatible with Chirp.

Make sure to check that the CSV files uses commas (,) as separators and NOT semicolon (;). This can be set in the meny you see below. Goto Start menu and type locale. Click the change date, time, number format.

Thanks to Alf LA2NTA for the data I used in this list. See another posting for the direct link to Alf’s list that is located in the cloud. My list here will not be frequently updated, but per April 2017 it should give a good starting point.

repeaterliste_eksport_XLS_XLS_sortert

No comments

How to do export and import of Excel files with CSV firmat in Chirp

  By ,
  • Program a couple of memory channels in your radio (in my case Icom Ic-2725) from the RADIO menus
  • Connect chirp to the radio
  • DOWNLOAD the data from the radio
  • Export from Chirp to a CSV file
  • Study this CSV file and use it as a template
  • Copy paste frequency and ctcss and offset info ++ from ANOTHER XLS file to the CSV file you made above!
  • Save as CSV from Excel (this is now your frequency list to import to the radio)
  • Check with Notepad ++ that there is COMMA (not semicolon) separation saved when you save as CSV from Excel. If this is not the case, go to regional settings / additional and set list separator as , (as opposed to ;). Start and stop Exel and a reboot wont hurt to make the settings take effect
  • Now you import this CSV list into Chirp
  • Upload to the radio
  • If you get error message that Chirp cant convert floating point in the tone settings, make sure to format EVERYTHING in your Excel sheet as GENERAL (not text, not number)