How to fix ORBI wifi mesh setup so all units on the network is visible

If you have experienced that some units on your Wifi network that were previously connected to your fiber or cable router cannot anymore be connected on your internal network – after you installed a set of ORBI mesh units – the reason may be that the ORBI system is not set up in access point mode. If it is set up in router mode, there is an internal firewall that acts in addition to the normal firewall you have in your cable or fiber modem. Log into the orbi unit with orbilogin.com and go to ADVANCED/Advanced/Router/APmode and select AP mode. Reboot the ORBI units and you are all set. All units on your Wifi network are visible (on your internal network). Read more here: https://kb.netgear.com/000061927/What-is-the-difference-between-router-mode-and-AP-mode